The Low Workbench as seen on my YouTube videos (clips below).

A mini workbench that can be used for surface planing against planing stops or between bench dogs, straight edge planing for both Western and Japanese planes, and a 150mm (6”) vise.

It can be either clamped to an existing table or bench, or can work well too above friction pads, when not too much force is needed.

Made from Bubinga wood top and European Oak feet, vise jaws and plane rails.

Five 20mm holes with one wooden bench dog included. Two sliding dovetail planing stops as well.

Dimensions approximately:

Overall: Length 650mm (25.5”) x Width 250mm (10”) x Height 90mm (3.5”)

Top 165mm (6.5”) Width x 45mm (1.75”) Thickness

Vise opening 90mm (3.5”)

Shipping not included, displayed at checkout. (e.g. €55 to USA, Canada, Europe)